|
MicroLube Near Dry Machining Lubricant-Extreme Duty
|
|
Rustlick RTD Tapping Fluid (1gal, 5gal, or 55gal)
|
|
Tap Magic Aluminum. Superb finish and no staining.
|
|
|
|
|
|
|
|
ML 2000 near dry machining lubricant
- Water washable for easy cleaning off parts and machinery
- Use in AccuLube, Trico and Unist lubricant systems
- Over 4500 lbs pin and vee block test
- Can be used with post heat treated aluminum without cleaning
|
Rustlick Tapping Fluid
|
Use for all cutting operations on aluminum. Beautiful micro fine finish and long tool life.
- Contains no 1,1,1
- Micro fine finish on all materials
- Available in 4 oz, 12 oz, aerosol, 1 gallon, 5 gallon and 55 gallon
|
|
|
|
Tap Magic EP-Xtra ozone friendly formula. Excellent on all cuts and metals.
|
|
Tap Magic Extra Thick Heavyweight For Hard Metals (Call for Pricing)
|
|
Tap Magic ProTap
|
|
|
|
|
|
|
|
Professional quality cutting fluid excellent for any cutting operation.
- Contains no 1,1,1
- Micro fine finish on all materials
- Available in 4 oz, 16 oz, aerosol, 1 gallon, 5 gallon and 55 gallon
|
For extreme performance on hard metals including inconel, titanium and stainless. Eliminates work hardening. Clings to tool.
- Contains no 1,1,1
- Clings to tool, excellent for lathes and mills.
- Dissipates heat rapidly.
- Available in 16 oz, 1 gallon, 5 gallon and 55 gallon
|
Biodegradable cutting fluid for all metals. Extends tool life. Tap Magic P/N: 702-30128P, 702-30016P, 702-30012PL, 702-30004P
|
|
|
|
Tap Magic ProTap Original Biodegradable Cutting Fluid
|
|
Tap Magic Xtra Foamy high visiility foaming action cutting fluid.
|
|
Tapmatic #1 Gold Tapping and Cutting Fluid
|
|
|
|
|
|
|
|
Free of all regulated chemicals. Excellent performance for all cutting operations on all metals.
- Contains no 1,1,1
- Will not stain or change properties of soft metals
- Dissipates heat rapidly.
- Available in 4 oz, 12 oz, aerosol, 1 gallon, 5 gallon and 55 gallon
|
High visibility foaming action with EP additive for extreme performance on the metals up to 45 RC. Clinging action stays with tool longer and eliminates work hardening
- Contains no 1,1,1
- Micro fine finish on all materials
- Available in 17 oz aerosol can
|
Excellent oil based tapping fluid for all metals, does not contain chlorine or chlorinated solvents, reduces cutting torque and improves finish.
|
|
|
Phone: 888-906-9370 (M-F 7am-5pm PST)
